Common Rail Injector: Four Fundamental Tips for Preventing Recurrent Failure
Posted on: 27 April 2021
If the common rail injector in your vehicle is damaged, you must acquire and install a replacement component to promote proper auto function. In general, these units are long-lasting and resilient in harsh working conditions. However, injectors will deteriorate due to contamination, moisture and lack of maintenance. Therefore, when you install a replacement unit, you must take precautions to prevent damage and fast wear. Here are important guidelines for preventing the failure of your new common rail injector.
Install Correctly
Incorrect placement of the common rail injector is one of the primary causes of failure in new components. Therefore, you should be cautious during the installation of this unit. Where possible, avoid handling the task as a DIY project. Instead, choose a qualified professional with experience working with these products. If you do choose to install the injector, follow the instructions provided by the manufacturer. Also, check the placement of the component with care before use. Small issues like loose seal rings and missing washers will compromise performance and longevity.
Prevent Build-Up
The formation of deposits in the common rail injector will cause the accelerated failure of the new component. In simple terms, this unit has a lot of delicate elements that are vulnerable to the accumulation of contaminants. Therefore, you must prevent this form of deterioration. The simplest action to consider is using good fuel. Opt for high-quality fuel and consider using cleaning additives. These actions will minimise the formation of residues during vehicle operation. You can also use a suitable fuel cleaner for your tank. Keep in mind that the dirt in your vehicle's tank could clog up the injector.
Change Filters
The filters in the engine are critical components to consider when maintaining your common rail injector. These products are designed to keep the engine working at optimal levels by preventing the flow of dirt into the core and delicate parts like the injectors. Therefore, you should plan on checking and changing all your filters regularly. You can have your auto mechanic handle this work during standard servicing. Do not wait until the filters are clogged because the performance of the injector will decline.
Improve Habits
Finally, you should improve your driving habits to keep the new common rail injector in the best condition. Poor operational practices exert a lot of stress on engine components, increasing the rate of wear and degradation. The most common issue is aggressive driving with fast starts and sudden stops. Also, consider limiting short journeys because the start-stop pattern is hard on the engine.
Contact a company that provides common rail injectors for more information.
Share